Ningshing Special-Steel have over 20 years for supplying high quality tool steel DIN 1.2714. We supply Die blocks as the extra Forging Reduction & Upsetting with Double tempered to achieve the better Ultrasonic quality.

DIN 1.2714 Tool Steel is highly recommendable for Close Die Forgings due to its characteristics of high wear-resistance, extra toughness , high hardness which is achieved with Cr-Ni-Mo-V high graded alloys.
The equivalent grade DB6 / L6 / SKT4 normally used as a pre hardened condition. The standard hardness is 360 to 430 BHN. DIN 1.2714 is the upgraded version of DIN 2713 for better performance of dies.

Abmessungen
Rund: Durchmesser 10–700 mm
Flach: 6–120 x 40–1200 mm
Block: 80-600 x 100-1600 mm

Lieferbedingungen
EAF+LF+VD+(ESR), warmgewalzt oder geschmiedet, geglüht oder vergütet (360–410 HB), schwarze Oberfläche oder bearbeitete Oberfläche, UT nach SEP1921 Klasse 3 D/d

Eigenschaften
1. A kind of Nickel-Chrome-Molybdenum-Vanadium steel for hardening in the stream of air or in oil with high hardenability.
2. With high hardness after hardening, good resistance to the tempering, good toughness and good firmness during the heat.
3. It resists quick temperature changes and also thermal fatigue.
4. The steel is well-workable during the heat and well-workable in the soft-annealed state.

Anwendung
DIN 1.2714 is used for making Dies for Drop Forging Hammers & Mechanical Presses, Die Molds, Shoe Blocks, Die Holder, Cassettes, Piston Rods, Cranks, Boaster, Shearing Blades, Tools, plastic molds, Shafts Etc. Quenching + Tempering condition is suitable for the application as forging dies, slides, punch heads, extruding stamps press tools, hot shear knives, extrusion press tools, die holders, support tools, tool holders, pressure plates.